MX Plus Proportioner, 4-Product, Bottle Fill (1 GPM), Flex-Gap

MX Plus Proportioner, 4-Product, Bottle Fill (1 GPM), Flex-Gap

Product Code: 7866401-F
  • This MX Plus model uses water pressure to accurately dilute and dispense up to four chemicals. 
  • The 1 GPM "bottle fill" flow rate is suitable for handheld spray bottles and other small containers.

View Product Sheet

Sale Price $165.00 /EA
  • Item Type Core System

MX Plus Proportioners: Facility Solutions

MX Plus proportioners are field serviceable and highly flexible dispensers.  Configurations allow for up to eight products, two flow rates, and a choice of Flex-Gap or Aire-Gap back flow prevention.

Dispensing is activated by pushing smooth-operating large buttons that can be locked into the on position for hands-free dispensing. Simply engage the catch to keep the flow open then press the button again and release to stop the flow. Spray bottles can be filled using one hand by pushing the bottle against the actuator bar.

Single and dual cabinets are available and may be equipped with a single product injector or a 4-product selector dial for each button. Designed for flexibility, each MX Plus can be reconfigured several ways in the field without tools.

The water inlet can be quickly swapped from one side to the other with a simple quarter turn of the water quick connect. Single product engines can be replaced with a dial 4 selector engine in a few simple steps: Slide the engine assembly out of the snap guides.  Remove the single product engine with a quarter turn. Replace with a dial-4 assembly. Pop out the blanking plate from the cover to reveal a round hole for the dial selector. Connect your four chemical supply lines and replace the snap-on cover.

Features
  • Built-in Flow-Control technology for accurate dilution in varying water pressures
  • Available with Flex-Gap or Aire-Gap backflow devices to meet national and local codes
  • Tool-less Components – ¼ turn connections; double O-ring design
  • Engines slide into snap-guides for easy service and re-configuration
  • Easily serviced diaphragm with ¼ turn cover
  • One-handed operation (for models with bottle-fill 1 GPM flow rate)
  • 6 ft. discharge tube (for models with bucket-fill 4 GPM flow rate)
  • Large, ergonomic buttons
  • Easy slide lock and release catch for buttons
  • Snap On/Off cover
  • Compact footprint
  • Included tip kit and poly tubing, foot valves and product labels
  • Optional compression, John Guest, or barb fittings available
Flow Rates
  • 1 GPM (3.8 LPM) bottle fill
Optimal Minimum Water Pressure
  • 30 PSI (2 bar)
Maximum Water Temperature
  • 140° F (60° C)
Back Flow Prevention
  • Flex-Gap
Certifications
  • A.S.S.E.
  • I.A.P.M.O. (UPC)

Click a link to open a PDF. You can then use your browser to download the PDF.

You May Also Be Interested In

List of suggested products: You May Also Be Interested In.

Your Browsing History

List of suggested products: Your Browsing History.